I have a solution for you. Unfortunately, we do not carry customized bed mats to fit your 1999 Chevy S-10 6-ft. bed. However, we do have a BedRug Universal Truck Bed Mat - Bed Floor Cover for Trucks with Drop-In Liners # BMX00D. Since the BedRug mat is 5-1/2 feet wide and over 8 feet long in length, it is more than large enough for the bed of your 1999 Chevrolet S-10 Pickup so it could be trimmed down to size easily. The mat installs quickly over your drop-in liner using threaded, plastic studs. view full answer...
Curt hitch # C13132 is a confirmed fit for your 1987 Chevy S-10 with a factory step bumper and it will not require you to drill any holes; the hitch simply bolts on. There will be no issues as far as the spare tire is concerned, it will be able to stay mounted underneath the truck.
The recommended wiring to add a 4-flat connector to your '87 S-10 is # HM41115. view full answer...
To add a 4 pole trailer connector to your S-10, I'd recommend the Curt T-Connector, part # C55312.
This custom-fit harness plugs into your Chevrolet S-10 Pickup's wiring harness, which is located beneath your vehicle, along the driver's-side frame rail.
Once installation is complete, the 4-way flat connector will be stowed beneath your Chevrolet S-10 Pickup, near the trailer hitch. A mounting bracket # 18144 is recommended to keep the connector secure.
It is recommended that you use... view full answer...
Yes, the Draw-Tite Front Mount Trailer Hitch Receiver part # 65004 is a confirmed fit for your 2001 Chevrolet S-10 ZR2. If you have the factory tow hooks then no-drilling will be required but if you don't have the factory tow hooks then you will need to drill. However, according to my research the ZR2 package came with factory tow hooks so you should not have to do any drilling.
The Draw-Tite Front Mount Trailer Hitch Receiver has a 300 lb vertical load rating and a 9,000 lb line pull... view full answer...
Depending upon the options on your 1998 Chevy S-10, we may have a video on our website detailed your installation. Not all models require drilling into the frame to install the hitch, and these hitches are very easy to install. However, in order to recommend a safe hitch, I need to know some of the options on your S-10. Which of the below options best describes your truck? With Rear Fascia and No Step Bumper, with Sportside Box and Non-Towing Bumper, with Standard Box and Step Bumper,... view full answer...
The Westin Fey Surestep Rear Bumper # 76001 requires custom install brackets and will not fit your current stock bracket. The kit for your 1991 Chevrolet S-10 that includes the bumper, brackets, and hardware is # 76001-97200.
For hitch balls you'll need a 3/4 inch shank. The Tow Ready 1-7/8 inch is # 19256 and the 2 inch is # 19258. Of if you'd like one interchangeable ball, the Convert-A-Ball # 800B can work as either. view full answer...
While there aren't any fitted truck bed mats for a 1993 Chevy S-10 Pickup there is the DeeZee Universal Utility Mat for Trucks and Trailers # DZ85009, which can be trimmed down to fit the bed. view full answer...
For your 1992 Chevy S-10 Pickup we have the following bumpers:
Chrome # 76000-97200
Black Diamond-Step # 66000-97200
Chrome With Non-Slip Pad # 76001-97200
Black With Non-Slip Pad # 66001-97200 view full answer...
Yes, the Tracker Tow Bar, part # RM-020 that you use with your Geo Tracker will also work with the 161-2 Standard base plates for your 2 wheel drive Chevy S10. view full answer...
The Air Lift Vehicle Suspension, # AL59531, is designed to fit the 2003 Chevy S-10 4x4 as long as it does not have a track bar. A track bar is a part of vehicle suspension on some vehicles that is designed to provide lateral location of the axle.
We do have a suspension enhancement system designed specifically for a ZR2 model. Take a look at the Timbren system, # TGMRS10A. I have included a link to the installation details for you to view. view full answer...
The Carr Custom-Fit Side Steps - Hoop II - Black Powder Coated Aluminum - 7" Step # CARR103991-1 installs into the body panel seam and that simply isn't strong enough on your 1999 S-10 pickup for a step.
If you want a confirmed fit for your extended cab S10, I recommend the DeeZee Nerf Bars - 3" Round - Black - Cab Length # DZ3700301 which will mount to the frame of your truck and ensure a solid fit able to support weight and be durable. view full answer...
Yes, the etrailer Trailer Hitch Receiver # e44KR fits your 1995 Chevy S-10 and is rated to tow up to 4,000 lbs with a 400 lb tongue weight. I really like this hitch because of the matte black finish that not only looks more rugged but is also more durable than the classic glossy black finish against road debris.
The next thing you need for your towing setup you also need the Curt T-Connector Wiring # C55312 and mounting brackets # 18144 and # C57202. This gives you a way to place the wiring... view full answer...
Yes. The Rapid Switch Systems Pro HD Truck Bed Ladder Rack for Compact Trucks - 800 lbs # RS48FR has an 800-lbs capacity, so it's going to be well suited to handling a roof top tent. view full answer...
In order to install a 7-way trailer connector on your 1999 Chevrolet S-10 Pickup you will want to use the Adapter 4-Pole to 7-Pole and 4-Pole part # 37185. This adapter will plug into the 4-way trailer connector you have on your vehicle and will give you both 4 and 7-way trailer connection points. Since you boat trailer only uses 5 of the 7 wires on the trailer connector, the only 2 wires you will need to attach on the 7-way is the ground and reverse light circuit. In order find the reverse... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13132 will fit your 1992 GMC Sonoma truck as long as you have a factory step bumper. It will require temporary removal of the rear bumper during installation. It is not a fit for a roll pan bumper.
If you have a roll pan bumper, you will need to use the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13920. This will require a relocation of the spare tire in short bed models as well as cutting the rollpan... view full answer...
Curt Class III trailer hitch # C13021 fits the following vehicles:
1982 - 2004 Chevrolet S-10 Pickup with Factory Step Bumper
1982 - 1990 GMC S-15 Pickup with Factory Step Bumper
1991 - 2004 GMC Sonoma with Factory Step Bumper
1996 - 2000 Isuzu Hombre with Step Bumper
If you are selling a hitch the hardware cannot be reused. It is meant to be torqued down one time only. So for replacement hardware use # RHK, enter the hitch number and manufacturer where indicated on the RHK page, then... view full answer...
According to my research, if you have the 2.2L I4 engine on your 1996 Chevrolet S-10 then you have 2-1/4" diameter exhaust pipe which means you would need to use the MagnaFlow Exhaust Cutout part # MF10783 but if you have the 4.3L V6 engine on your 1996 Chevrolet S-10 then you have 2-1/2" diameter exhaust pipe which means you would need to use the MagnaFlow Exhaust Cutout part # MF10784. view full answer...
We do have some options for you to tow a trailer with a clevis mount but the Buyers Products Adjustable Tri-Ball Mount # 3371802225 that you referenced doesn't have provisions for that.
Instead you can either use the Convert-A-Ball # CAB-6W which comes with 3 different hitch ball sizes plus the clevis or the Curt # C45008 which has 2 hitch balls and the clevis but you need a shank like part # C17100 to mount it to for adjustability.
Attached are some review videos for you to check out. view full answer...
For your 1982 Chevrolet S-10 Pickup, you will need the Tekonsha 4-Pole Hardwire Kit with Circuit Tester, part # 18252. This hardwire kit will provide a 4-way flat trailer connector for your S-10. The T-One Wiring Harness # 118312 mentioned in your question is not longer available and is not compatible with the 1982 Chevrolet S-10.
I have included a link to the instruction manual for the Hardwire Kit. view full answer...
Go To Results